INAxial fan
FEATURES
- Axial fans to extract air directly outside or through short ducting also suitable for glass application with optional glass kit.
- Low profile grille with operating indicator light.
- Two fixing screws and click assembly of the grille for easy installation.
- Double insulated product, without ground wire for fast connection.
- For ducts Ø 92-100-125-150 mm.
- Base, Timer, HT, PIR, 12V model options.
- Reduced internal wall dimensions to allow installation where the bend of ducting is close to the outlet of the product.
- A version: internal, silent automatic shutter.
- BB versione: ball bearing motor.
- SELV 12V version: working at12V AC, installation within the safety zones 1 and 2.
- IPX4 protected (EN 60529), 45°C working temperature.
- In accordance with Standard EN 60335-2-80.
POSITIONING
- Wall mounting
- Ceiling mounting
- Glass mouting (eccept IN9/3,5")
FURTHER INFORMATION
IN
- Timer version: Turn-off delay adjustable from 2 to 25 minutes.
- HT version: The fan automatically starts when the humidity in the room is higher than the preset value, adjustable from 40% to 90%.
- PIR version: The fan automatically starts when the sensor detects a presence in the room. When the room is vacated the fan will continue to run according to the preset value on timer.
- Careful selection of materials: grille in ABS and body in polypropylene talc filled.
- Performance tests in accordance with Standard UNI 10531, noise tests in accordance with Standard UNI EN ISO 3741, carried out by IMQ Clima laboratory on products samples (In 10/4, In 12/5, In 15/6 models).
IN A
- Internal, silent and automatic shutter.
- Automatic opening and closing by a thermal actuator simultaneously with the switching ON and OFF of the fan.
- Available on all the models except to IN 9/3,5”.
IN SELV
- This is the SELV (Safety Extra Low Voltage) version working at 12V AC. of the axial fan model IN 10/4.
- This fan can be installed within the safety zones 1 and 2, as defined by the Standard IEC 364-7 part 7, where the risk related to electrical connections is very high.
- The very low power voltage of the IN 10/4 SELV, provided with a dedicated power supply allows the installation close to the bath or the shower because any possible direct contact with the fan does not cause electrical risk. The power supply must be installed within zone 3.
IN 9/3,5"
- Diameter of 92 mm.
- Timer version: Turn-off delay adjustable from 2 to 25 minutes.
- Careful selection of materials: grille in white ABS and body in polypropylene talc filled.
- Noise tests in accordance with Standard UNI EN ISO 3741, carried out by IMQ Clima laboratory, on products samples.
DIMENSIONS
Product versions
Slide the table to the right
Model | Code | Ø hole (mm) | Voltage (V) | Frequency (Hz) | Flow rate (m³/h) | Max. Press. (mm H₂O) | Max. Press. (Pa) | Power (W) | Noisiness dB(A)3m | Weight (Kg) |
---|---|---|---|---|---|---|---|---|---|---|
Model | Code | Ø hole (mm) | Voltage (V) | Frequency (Hz) | Flow rate (m³/h) | Max. Press. (mm H₂O) | Max. Press. (Pa) | Power (W) | Noisiness dB(A)3m | Weight (Kg) |
IN 9/3,5" | 0055500 | 92,5-100 | 220 - 240 | 50 | 75 | 2,8 | 28 | 11 | 31,6 | 0,4 |
IN 9/3,5" T | 0055600 | 92,5-100 | 220 - 240 | 50 | 75 | 2,8 | 28 | 11 | 31,6 | 0,4 |
IN 10/4" | 0050100 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 10/4" T | 0050700 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 10/4" HT | 0054300 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 10/4" PIR | 0054600 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 10/4" Pull cord | 0050180 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 12/5" | 0050200 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,5 |
IN 12/5" T | 0050800 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,5 |
IN 12/5" HT | 0054400 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,5 |
IN 12/5" PIR | 0054700 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,5 |
IN 12/5" Pull cord | 0050280 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,5 |
IN 15/6" | 0050300 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 15/6" T | 0050900 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 15/6" HT | 0054500 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 15/6" PIR | 0054800 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 15/6" Pull cord | 0050380 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 10/4" BB | 0052500 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 10/4" BB T | 0052800 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 13 | 35,6 | 0,4 |
IN 12/5" BB | 0052600 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,7 |
IN 12/5" BB T | 0052900 | 120 | 220 - 240 | 50 | 180 | 4,6 | 45 | 18 | 38,8 | 0,7 |
IN 15/6" BB | 0052700 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 15/6" BB T | 0053000 | 150 | 220 - 240 | 50 | 330 | 6,2 | 61 | 29 | 42,2 | 0,7 |
IN 10/4" SELV 12V | 0055700 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 15 | 35,6 | 0,4 |
IN 10/4" SELV 12V T | 0055800 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 15 | 35,6 | 0,4 |
IN 10/4" SELV 12V HT | 0055900 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 15 | 35,6 | 0,4 |
IN 10/4" SELV 12V Pull cord | 0056000 | 100 | 220 - 240 | 50 | 105 | 2,8 | 28 | 15 | 35,6 | 0,4 |
IN A 10/4" | 0050400 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,6 |
IN A 10/4" T | 0051600 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,6 |
IN A 10/4" HT | 0051900 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,6 |
IN A 10/4" PIR | 0052200 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,6 |
IN A 10/4" Pull cord | 0050480 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,6 |
IN A 12/5" | 0050500 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,7 |
IN A 12/5" T | 0051700 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,7 |
IN A 12/5" HT | 0052000 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,7 |
IN A 12/5" PIR | 0052300 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,7 |
IN A 12/5" Pull cord | 0050580 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,7 |
IN A 15/6" | 0050600 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" T | 0051800 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" HT | 0052100 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" PIR | 0052400 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" Pull cord | 0050680 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 10/4" BB | 0053100 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,5 |
IN A 10/4" BB T | 0053400 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,5 |
IN A 10/4" BB HT | 0053700 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,5 |
IN A 10/4" BB PIR | 0054000 | 100 | 220 - 240 | 50 | 110 | 2,8 | 28 | 16 | 35,6 | 0,5 |
IN A 12/5" BB | 0053200 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,6 |
IN A 12/5" BB T | 0053500 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,6 |
IN A 12/5" BB HT | 0053800 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,6 |
IN A 12/5" BB PIR | 0054100 | 120 | 220 - 240 | 50 | 185 | 4,6 | 45 | 21 | 38,8 | 0,6 |
IN A 15/6" BB | 0053300 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" BB T | 0053600 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" BB HT | 0053900 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |
IN A 15/6" BB PIR | 0054200 | 150 | 220 - 240 | 50 | 340 | 6,2 | 61 | 29 | 42,2 | 0,9 |